The long metal drill bit is perfect for drilling a deeper hole.
It is made of very durable, hardened M2 high-speed steel, which is particularly resistant to cracking. This reduces the risk of the drill bit breaking.
It is designed for drilling and making holes in steel, cast iron, non-ferrous metals, and hardened plastics. Also suitable for drilling hardened and stainless steel.
The 135° split point technology makes it easier to start drilling. It also provides the possibility of self-centring drilling on oval surfaces without the need of hole punching in the material. Moreover, it shortens drilling time.
The geometry of the drill bit allows for quick removal of cutters, which, together with the precision of sharpening, speeds up the work.
It was made in accordance with the German DIN 338 standard.
Metal drill bit 5×315
By
kaljurandin lääni
/ huhtikuu 11, 2026
For metal, Työkalut, ADE, Drills, For metal
Metal drill bit 5×315
Length – 315 mm; diameter – 5 mm; material – M2 high-speed alloy steel; function – self-centring drilling point angle – 135°; mounting -cylindrical; standard – DIN 338; application -metal;
Tootekood: HT2A017
Tarneaeg: 14 päivää
Aiheeseen liittyvät tuotteet
-
Abrasice disc w/holes for paint / filler 150mm G400 5pcs
Lue lisää Abrasive discs for varnish and putty ø150 mm- open embankment made of aluminum oxide with the addition of sodium stearate
- a binder made of synthetic resin
- the disc attached to the attachment with Velcro ensures quick installation or replacement
- dust extraction system – pulleys compatible with devices equipped with a dust extraction system with 6, 9 or 15 holes
- reduction of sticking of the embankment due to the addition of sodium stearate significantly extends the efficiency and lifetime of the disc
- 5 pcs in the package.
-
Impact adapter set for 1/4″ sockets, 3 pcs.
Lue lisää Työkalut- Adapters for 1/4", 3/8" and 1/2" impact sockets with 1/4" HEX chuck;
- For screwdrivers, impact wrenches and drill drivers;
- For workshop, service and domestic applications.
-
Rubber backing pad Ø125mm M14 w/shaft
Lue lisää Työkalut- diameter 125 mm
- M14 mounting for angle grinders
- additional 7 mm screw-in spindle intended for mounting in drills or straight grinders
- Velcro for attaching abrasive discs
- maximum speed of 10,000 RPM.




