A LED driver reduces the input voltage of 220-230 V to 12 V. Thanks to this, it can be used to power most LED strips of furniture fittings. The LED driver from GTV has short-circuit and overload protection, which increases the safety of its use.

The LED driver is mounted in a standard ∅ 60 mm installation box, directly behind the switch. On one side 220 V LED driver should be brought to the box, and on the other side (at the output) there should be cables supporting 12 V.

Devices with a maximum total power consumption of 15 W can be connected to the LED driver. At the same time, it is important to remember that if the LED driver has to work for a long time, it should not work at its full power. The recommended reserve should be around 1.5 W.